Hydrophilic Products

Based on association forces between the hydrophilic and supporting polymers, or a patented interpenetrating network formed in situ during drying, these urethane systems can reduce kinetic friction to below 0.1.


US Patent 6,238,799 Hydrophilic Coating 2001
US Patent 6,866,936 Hydrophilic Coating 2004
US Application 60-797,404 Hydrophilic Coating 2006


* Patented systems use crosslinking agents to bind the supporting polymers to each other for better strength and resistance to solvents, sterilizing   materials, heat and body fluids. Crosslinkers also bind to functional groups on the surface to improve adhesion.

Applications Methods:

▪ Dip
▪ Pad/ Brush
▪ Spray
▪ Flow/Curtain
▪ Gravure/Roll/ Knife Over Roll

Instructions for use

Possible manufacturing routes: Biocoat Blog (you will leave this site) 

  MSDS Sheets for Hydrophillic B Patented Products

  MSDS Sheets for Crosslinker A Products

  MSDS Sheets for Crosslinker B Products

  MSDS for Primer 5-017

Coatings2go, LLC is not responsible for the use of any of the information contained, or any product mentioned, in this document, and you must make your own determination of its suitability and completeness for your own use. You should conduct your own testing. All expressed and implied warranties, including any implied warranty of merchantability and warranty of fitness for a particular purpose and warranty arising out of the parties™ course of dealing are hereby disclaimed by C2g. The products are being sold "As Is". You are responsible for handling and disposal according to local, regional and federal regulations. C2g shall not be liable for any incidental or consequential damages. Nothing herein shall be construed as a license or sublicense to operate under any C2g or third party owned patent or as a warranty against infringement of any patent. By placing an order for any of these products and/or by accepting their delivery, the purchaser agrees to the above waivers.